Keypads and interior sirens start
beeping, indicating the system is
armed and must be disarmed.
2.
Disarm the system:
At the Keypad nearest the entry/exit
delay door, enter:
Access Code
+
YES
If disarming from a Keyfob, press the
OFF button.
The Keypad shows the date/time
display and DISARMED.
Disarming after
Overnight Arming
Since there are no entry beeps to
remind you in the morning that the
system is armed, waking up inside the
armed premises requires immediate
disarming before opening any protect-
ed door or window. As mentioned earlier,
the Keypad LED flashes once every two
seconds as a reminder that the system
is armed.
1.
After waking up, press any Keypad
button (except the red panic button)
to activate the display, which shows
SYSTEM ARMED.
2.
Immediately disarm the system:
At the Keypad, enter:
Access Code
+
YES
If disarming from a Keyfob, press the
OFF button.
The Keypad shows the date/time
display and DISARMED.
Using Your System
for an Emergency
You can manually activate a panic alarm
anytime the need occurs, whether the
system is armed or disarmed.
For example, if someone experiences a
medical condition or an injury, it is best
to activate the alarm and get trained
professional help to your location. You
can even have your installation dealer
set this up for a specific use based on
your personal needs.
Activating an Alarm in an Emergency
•
Press and hold the red panic button
on any Keypad for two seconds, then
release it.
2
ABC
3
DEF
1
1
2
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
0
@
M
m
YES
ESC
NO
CLR
Access Code
+
YES
•
On a Keyfob, press and hold either the
1 or 2 button for five seconds, then
release them. If button 1 is pushed the
interior and exterior sirens activate. If
button 2 is pushed the silent panic is
not displayed on the keypad and the
control panel sends an emergency
alarm report to the central monitoring
station.
Keypad
Panic
Button
V i d e of i e d S e c u r i t y Sys te m O wn e r s M a n u a l
9
