Videofied IMD 200 Скачать руководство пользователя страница 4

Properties

Panel Compatibility 

XL, XLL, Visio, XT, XT-iP, XV, XV-iP, XTO, XTO-iP

Power requirements:

        

Type 

AA  

         Nominal Voltage  

3.6v

         Low battery limit  

2.7v

         Battery type 

SAFT, AA, Lithium, LS14500

         Quantity 

1

         Battery life (estimated) 

Up to 4 years

Current Consumption:

 

         Standby (1h average)  

40 uA

         Max   

37 mA

RF Technology:

 

S

2

View

®

 Bidirectional Radio

         Central Frequency 

868MHz  :  IMD200(Europe, Africa, Asia)

 

915MHz  :  IMD601(USA, Canada, South America)

 

920MHz  :  IMD701(Australia, South America)

        

Radio type 

Spread Spectrum Bidirectional RF

          Transmission security  

AES algorithm encryption

          Supervision 

Panel polls devices every 8 minutes

          Antenna 

Integrated

Tamper:

 

Wall and cover tamper

PIR Performance:

        Technology 

Passive infrared DSP

        Type 

Dual element

         Lens 

Fresnel

         Detection Angle 

 90°

         Detection Distance 

Up to 40 ft/12m 

         Motion Detection pattern  

24 facets

Physical Data

Operating temperature 

14° to 104° F (-10° to +40° C)

Maximum relative humidity 

75%, non-condensing

Material 

ABS—ULV0 

Dimensions: 

 

(LxWxD): 2.75 x 2 x 1.5in

 

51.2 x 80.9 x 36.8mm

Weight 

3 oz./58 g (without battery)

Installation / Mounting

Mounting Height

 

2 .1 to 2.3m / 6.5 to 7.5ft

Mounting on Wall:

 

      On Flat Wall 

With 2 x Screws

      In Corner 

With 2 x Screws 

Closing of the Casing:

  

   

   

Closing by clip and screw if required by local legislation

 

Certifications & standards

868MHz - IMD200

          Standards : 

                     

EN60950-1:2006+/A11:2009+/A1:2010 

                     

EN300220-1 V2.4.1 

                     

EN300220-2 V2.4.1 

                    

 NF EN50130-4:1995+/A1:1998+/A2:2003; 

                    

 NF EN50130-5:1998 Classe II 

                    

 NF EN50131-2-2:2009 - Grade 2 

                    

 NF EN50131-5-3:2005 - Grade 2 

                    

 NF EN50131-6:2008 Grade 2 –Type C 

          Certifications 

                    Europe                  

  CE / EN50131 Grade 2 

                    Netherlands                

 NCP 

                    Singapour              

 IDA 

                    South Africa      

ICASA 

915MHz FHSS - IMD601

          Certifications 

                    USA                    

FCC Part 15C (FCC47 CFR Part 15) 

                    Canada           

 IC (RSS-210 Issue 8)

920MHz FHSS - IMD701

 

 

          Certifications 

                                        Australia                     

  C-Tick  (AS-NZS4268)                                                 

I N S T A L L A T I O N   S H E E T

Indoor MotionViewer 

IMD 

200/601/701

www.videofied.com

North American Headquarters

1375 Willow Lake Blvd, Suite 103
Vadnais Heights, MN 55110
USA
E-Mail : [email protected]

EMEA SALES

23, avenue du Général Leclerc
92340 BOURG-LA-REINE
FRANCE
E-Mail : [email protected]

Содержание IMD 200

Страница 1: ... Install the detector and other system devices in the following order Programming RF Testing Program detector and all other devices into the control panel and test RF communication at each intended devicelocationtothecontrolpanel Mounting Mountdetectoratthetestedlocation Mounting Rules Usepropertoolsandhardware Mountindoorsinatemperaturecontrolledenvironment Mountdetector2 1to2 3m 6 9to7 5ft fromt...

Страница 2: ...on the keypad until the desired AREA number appears then press YES By default all devices in area 1 will be subject to the entryandexitdelays 11 ThedisplayshowsNAME LOCATION Enter an appropriate device name up to 16 characters The name of the device should describe its intended mounting location or zone PressYES Thedisplaywillshowthedevicenumberandnameforyour verification 12 MounttheIMDonthewall F...

Страница 3: ...ce to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving ante...

Страница 4: ... Dimensions LxWxD 2 75 x 2 x 1 5in 51 2 x 80 9 x 36 8mm Weight 3 oz 58 g without battery Installation Mounting Mounting Height 2 1 to 2 3m 6 5 to 7 5ft Mounting on Wall On Flat Wall With 2 x Screws In Corner With 2 x Screws Closing of the Casing Closing by clip and screw if required by local legislation Certifications standards 868MHz IMD200 Standards EN60950 1 2006 A11 2009 A1 2010 EN300220 1 V2 ...

Отзывы: