10
9
Basic Operation
If ball goes for a SIX then it will be displayed for a short time intervals "SIXER" on the screen &
score is updated.
So if user wants to take a single RUN after hitting the ball, he has to press now VOL + key
continuously. Failure to taking run properly would make him RUN OUT.
After taking run or after runout or being caught or bowled or hitting sixer the sequence gets
repeated. This enter sequence continues till the required target is achieved, or till 25 overs are
completed or all the 10 wickets are gone. If user failed to achieve target or all the 10 wickets are
gone then it shows display,
TV WON THE MATCH
. It also shows game details about RUN,
WKTS, OVERS.
Note :
1) After 10 overs the speed at which the bowler bowls will increase.
2) Randomly the position of the fielder near to the pitch on off side at the far end changes and he
moves.
3) Forward to take a catch when the user tries to hit a center shot for either off side or leg side ball.
4) So the user should take enough care not to go for a straight shot for these ball under this
condition not to get himself caught out, if he is careful enough to play then he can score four runs.
5) Scores above 200 cant be achieved.
LANGUAGE (Optional) :
Go to the language option by
CHANNEL UP / DOWN key and select appropriate
language by VOLUME UP / DOWN key. You can select
ENGLISH, HINDI, MARATHI and GUJRATI language,
which will be used for displaying menus and
indications in selected language.
LOCK MENU (Optional) :
This feature prevents unauthorised use of your TV set as it can be operated only by remote
handset.
Press hold Lock key from remote to enter into Lock menu.
TV LOCK
This feature is used to lock all the TV operations, when TV lock is ON, display OSD shows "TV
LOCK".
AV LOCK
AV LOCK when set to ON, will lock the AV Operations.
PANEL LOCK
Panel lock when set to ON will lock the front panel operations and will not allow to do any
operation through it.
VOLUME LOCK
Using this feature you can set volume at required level beyond which you do not wants to increase
further. To lock the volume make it ON.
CH LOCK
Used to lock unwanted channels. Select Lock code and enter password 9008 (Default). SET
Code will appear. Here set required user password. It will ask now to enter lock code. Enter the
preseted password. Now you will be in CH Lock menu with 3 options CH LOCK, LOCK
PROGRAM & STATUS.
CH LOCK when set to ON, selected channels in LOCK PROGRAM will get locked. LOCK CH will
allow you lock to required channel. STATUS option will allow you to set status of channel i. e.
VIEW or BLOCK. When CH LOCK is ON tunning menu gets locked.
TV LOCK OFF
AV LCOK OFF
PANEL LOCK OFF
VOLUME LOCK OFF
LOCK CODE - - -
Basic Operation
SLEEP TIMER
This function can be used to switch OFF the TV during bedtime. Repeatedly pressing
of key on remote hand set will change sleeping time. You can set SLEEP TIMER in
steps of 5 within 0-180 min.
CHANNEL SCAN (Optional)
To scan all the program, press the key on the remote hand set. Press key again
to discontinue the scanning.
QUICK VIEW
This is used to toggle between current channel and last viewed channel. Press Q.V. on remote
handset to use this function.
SELECTABLE PICTURE :
5 selectable picture modes CUSTOM-STANDARD-GAME-
MOVIE-SPORTS. These modes can be accessed by direct key on remote. Press this
key repeatedly to switch to desired picture setting.
SELECTABLE SOUND (Optional) :
4 selectable sound CUSTOM-VOICE-MUSIC-
THEATRE. These modes can be accessed by direct key on remote. Press this key
repeatedly to switch to desired sound setting.
SLEEP
SCAN
SCAN
MUSIC MODE
(Optional)
Set MUSIC MODE ON when you want to listen music only .When music mode set to
ON OSD display will show “MUSIC MODE” and video will disappear.
You can directly access MUSIC MODE by key on remote hand set.
MUSIC
SENSI EYE (Optional) :
The Sensi Eye feature can be
switched ON from the remote handset only by pressing
Sensi Eye key. On the first press of the key, feature will
be OFF displayed on the screen. On the second press
the feature is activated without any display on the
screen.
On the third press, feature remains activated and the
display of Sensi Eye is displayed on screen whenever
intensity of ambient light changes. In this feature with
change in ambient light, picture setting will change viz
Brightness, Contrast. When Sensi Eye feature is
switched ON, you can not make any change in the
settings of picture menu and Selectable Picture key
will not work.
After making this feature OFF, you can change the
setting in picture menu as per your choice.
Содержание NANO-1BST-2CST
Страница 1: ...Cover 3 Cover2 ...