7
8
Basic Operation
CH SKIP :
You can skip unwanted programs with this feature. The skipped programs will not
be selected by CHANNEL UP / DOWN key on remote or TV set, but it can be selected by
pressing skipped program no. by direct digit selection keys on remote. The program no. will
change colour to red for skipped channel indication. To unskip the channel, select CH SKIP in
TUNING menu and make it OFF.
FINE TUNE :
This allows to fine tune the channels manually in case of weak or distorted
signals. For the fine tuning, select FINE TUNE in install menu and for adjustments use
VOLUME UP/DOWN key.
CH SEARCH :
Using this feature you can easily search the required channel. It allows manual
searching to tune next or previous channel from current channel.
AUTO SEARCH :
This feature is useful to tune all the channels in the frequency range
available to you and store them. Auto tuning starts from program no. 1. To stop auto tuning,
press MENU or CALL key. If any program skips during AUTO SEARCH retune the set with
AUTO SEARCH or CH SEARCH.
COLOUR-SYS :
By using VOLUME UP/DOWN key, you can set colour system in
AUTO/NTSC-4.43/NTSC 3.58/PAL mode. Try to change the setting till proper colour in picture.
SOUND-SYS :
Sound system B/G is followed by India.
PLUG N PLAY :
When the television is intially powered on, plug and play is the basic setting
proceed automatically. Make it ON, if you need to tune all the available channels every time
after set switch ON from mains. To stop plug and play press MENU or CALL key.
4) TIMER MENU
CLOCK :
You can set time by using 0 to 9 keys in
AM/PM. You can change AM/PM status by Vol+/- key.
In ALARM ON condition it shows warning message
before set goes to std by.
ON CH :
Used to switch on set using ON TIMER to the
required program number.
ON TIMER & OFF TIMER
You can set ON/OFF timer by using 0 to 9 keys. Your TV set will switch ON/OFF automatically
at the time you select.
DISPLAY :
Clock display will appear continuously on the screen by making display ON & it will
disappear by making Display off.
ALARM :
In Alarm on condition GOOD BY is display before set goes to standby.
CLOCK - - : - - AM
ON CH
ON TIMER
OFF TIMER
OFF
DISPLAY
ALARM OFF
- - : - -
- - : - - AM
- - : - - AM
5) INSTALL MENU :
BLUE BACK :
When blueback is ON, sets the screen in
pleasant blue colour, if no signal is being received in
TV/AV mode. Blueback gets disabled as soon as the
transmission resumes. It also activated automatically with
poor reception of signal. For watching TV in case of weak
signal reception, you can OFF the blueback. Set gets OFF
automatically if blueback is present more than
approximately 10 minutes.
BLUE BACK ON
CH NO 1
SWAP TO - - -
SWAP NOW
GROUPING OFF
GAME
LANGUAGE ENGLISH
Basic Operation
(A)
RUNS WKTS OVERS
TV 100 10 25
VS
USER
SCORE BOARD
SET LEVEL
START
(B)
0:00 R:00 W:00
PRESS CALL TO EXIT
SWAPPING :
This feature is used to swap two channels. In SWAP TO set program number
which is to be swapped with current program by using direct 0 to 9 keys from remote handset.
Now select SWAP NOW to swap the two programs.
GROUPING (Optional) :
Using this feature you can sort out your FAVORITE channels in Groups like MUSIC, MOVIE,
NEWS, SPORTS, EDUCATION, FAVORITE by 1-6 digit keys respectively procedure to group
channels.
Select desired group from GROUPING parameter on desired channel number. Then come out
of menu.
Now press & hold FAV/GRP key for 2 sec. & use 1 to 6 keys to select desired group. Then use
CH Up/Down key to view channels in that group.
To come out of that mode press FAV/GRP for 2 sec.
Procedure to erase channels
After completion of AUTO PROGRAM all grouped channels will be erased.
GAME (Optional) :
The game available is Cricket. TV VS
USER as shown in fig.
As soon as this fig. (A) appears press VOL Up key to enter
into game. You can set target RUN by setting SET LEVEL
option. Four keys will be used to play game.
OFF SIDE SHOT : CH DOWN key
LEG SIDE SHOT : CH UP key
CENTER SHOT : VOL / DOWN key
MAKE BATS MAN RUN : VOL UP key.
As shown in fig. (B)
O - Stands for Overs
R - Stands for Runs
W - Stands for Wickets
Initially wait for some time delay till bowler starts bowling ball in 3 different ways i. e. offside
center & legside ball.
When ball crosses half way pitch i. e. When it just comes in front of batsman then user has to
press CH UP / CH Down & VOL down key.
Failure to give shot at proper time would make him bowled and then wickets are updated
accordingly at the top side of the screen.
Once user hits ball in any direction he can now has option of taking one run or going for SIXER
or FOUR RUN or he may not take RUN at all.
Содержание NANO-1BST-2CST
Страница 1: ...Cover 3 Cover2 ...