IPC-2MPSR50w Owners Manual Rev.1.0
9
INSTALLATION
NOTE:
This WiFi IP Network Camera has a wireless transmission range up to 300 Feet.
Before installation, consider where your access point is located for optimal performance.
Mark the screw hole locations in the ceiling where the camera will be mounted
Attach the included rubber O-Rings to the 4 mounting screws. This will ensure a water-tight
seal and protect the camera from damage.
Water Damage will Void the Warranty
.
Feed the cables through the ceiling to make your power and or network connections.
Using the included key, remove the three security screws and the dome cover.
Insert all four mounting screws through the base of the camera and into the ceiling.
*Depending on the mounting surface, we recommend using wall plugs.
Replace the dome cover and secure using the three security screws.
WARNING:
FOR ALL OUTDOOR INSTALLATIONS, THE INCLUDED RUBBER O-
RINGS MUST BE INSTALLED ON ALL-FOUR MOUNTING SCREWS DURING
INSTALLATION TO PROTECT THE CAMERA FROM WATER DAMAGE.
DO NOT OVER-TIGHTEN -
WATER DAMAGE WILL
VOID THE WARRANTY
