VideoComm Technologies CX-580SR120, Руководство пользователя

Страница: 10 / 12

Day-Night Camera Series Manual Rev.D 2013
10
Wireless Models: Channel Selection
For the wireless video link to work, both the wireless camera and receiver must be set
to the same channel.
All Models: Adjusting Focus & Zoom
Frequency
Channel # 1 5.725 GHz
Channel # 2 5.752 GHz
Channel # 3 5.771 GHz
Channel # 4 5.790 GHz
Channel # 5 5.809 GHz
Channel # 6 5.828 GHz
Channel # 7 5.847 GHz
Channel # 8 5.875 GHz
Step # 1 - Remove the Cap from the rear camera housing
using a Coin or Flathead Screw Driver
Step # 2 - Using the rotary switch,
set your channel.
Both the Camera and Receiver must
be set to the same channel
Step # 3 - Place the cap back on the rear camera housing and tighten using a Coin or
Flathead screwdriver.
Failure to do so may result in water damage
and void the warranty. For assistance, contact Technical
Support (905) 336-9665 or info@VideoTransmitters.com
To Adjust the Camera Focus & Zoom, loosen the two
adjustment knobs located on the back of the camera using the
included Mini Philips Screw Driver.
After making your adjustments, tighten both adjustment knobs
using the included Mini Philips Screw Driver to ensure a water
tight seal.
Failure to do so may result in water damage and
void the warranty. For assistance, contact Technical Support
(905) 336-9665 or info@VideoTransmitters.com