Contents:
1-
A converter box with USB cable
Required Accessories:
1-
Two HDMI cables
2-
5V wall connector*
3-
3D IR Active Shutter glasses for 60Hz/120Hz displays or DLP Link glasses for DLP displays
4-
An emitter for 60Hz/120Hz displays – not required for DLP Link glasses
5-
3-pin DIN connector cable for the Emitter
Installation Steps:
The End Plate with 3D-Theatre marking:
1-
Insert one end of an HDMI cable in the HDMI OUT on the converter box
2-
Insert the other end of the same HDMI cable in to the television/projector
3-
Take 3-pin DIN connector cable and connect it to SYNC on the same end of the converter. The other end goes to the back of the
emitter (round IR device with two blue push buttons)
4-
Push Dip Switch #1 down (ON) for 60Hz televisions/projectors. Keep it in OFF (UP) position for 120Hz
The End Plate with Video Innovation Products marking:
1-
Insert one end of an HDMI cable in the HDMI IN on the converter box
2-
Insert the other end of the same HDMI cable in to the PS3 or any other 3D Blu-Ray player
3-
Take a USB cable and insert on end to the box and the other en d either via 5V connector* to the wall outlet (recommended) or
directly in a powered device such as your player/display
