19616-001 Rev. D
DiagnosticPRO
Edge
Film Digitizer Installation Guide
18
Place the digitizer on a table
1. Select a working location for the film digitizer. Consider the following points when
selecting a suitable location:
The digitizer can only be used on a desk, countertop, table or other physically
stable surface not more than 36" (91cm) high.
SAFETY WARNING
The digitizer
must
be placed on mechanically secure horizontal
surface, such as a desk or countertop not more than 36" (91cm)
high and with no more than a 5° tilt.
The digitizer
must not
be placed on the floor.
VIDAR Systems Corp. is not liable for any damages or injuries
to persons or property associated with improper placement or
use of the digitizer.
The digitizer must be within 6 feet (1.8m) of an electrical outlet.
The USB cable must be able to connect to both computer and digitizer.
The digitizer must be away from high traffic areas.
2. Place the digitizer in the location you have selected. Ensure the digitizer is stable (for
example, it should not rock when touched).
3. Go to “Final assembly,” the next chapter in this manual.
