Installation Instructions
24V VidaPower 4-Port 90W Power-over-CAT5 / Ethernet Switch
Optimized for 24V VidaCharger Power-over-CAT5 to USB Power Adapters
•
Do not use non-VidaPower or non-VidaCharger products with this VidaPower Switch
. For optimal performance,
only VidaPower or VidaCharger branded products, should be used in concert.
•
Indoor use ONLY. The switch must be used only in a dry, non-condensing environment.
•
The included AC power cord must be plugged into a properly grounded wall outlet for safety. Do not use any 3-prong
to 2-prong converters or adapters, which bypass grounding & compromises installation safety.
•
The switch must be placed on a stable surface, preferably affixed and mounted permanently.
Do not leave it “dangling” and using plugged in cables as tension support. Drops, falls, and impacts experienced by
the switch can compromise the internal components & cause premature failure.
•
Do not place heavy objects on top of this switch.
•
Allow at least 4 inches of clearance on all sides of the switch for heat ventilation.
With (4) RJ45 ports, this high wattage, Power-over-CAT5 switch is optimized for use with VidaCharger® CAT5-to USB
adapters – supplying up to a total of 90W maximum, or 22.5W per RJ45 port! There is no need to configure the switch –
installation is simply “Plug-n-play!” Follow these instructions below for a fast, successful setup!
24V 4-Port Switch
Power Cord
(Kitted for US, EU, UK, AUS, or
other region-compatible plug)
Important Notes:
Component Checklist:
Overview
