gx/maxi-gx
4 / 5
Relay 2
NO
COM
NC
In an installation with internet available; the simplest method is to connect the Maxi GX to the local network using an
UTP cable; then verify on the front-display that it has been assigned an IP address (its default configured for DHCP).
And then on a computer with internet go to our
and follow the instructions in
of the
CCGX Manual.
Alternatively, on the local network the device can be easily found with
. This video shows how that is
done:
Use the push button to cycle to the LAN ip address page:
Refer to the
Below picture shows all the LEDs in the product:
green power LED on the
Traco Power
power supply
