will not stop automatically when finished.
2.Do not touch the stylus tip by fingers.
Bluetooth Out
This function can transmit the record playing on the unit to external Bluetooth speaker/headphone by Bluetooth wireless connection
during the PHONO mode.
1. During the Phono mode, long press the
“
/ BT Out
”
key on the unit or
“
”
key on the remote to enter Bluetooth pairing status.
2. Turn on the external Bluetooth receiver device (i.e Bluetooth Speaker or Bluetooth Headphone) and entering the pairing mode.
3. The turntable unit and external Bluetooth receiver will connect automatically. This process can take up to approx. 30-45 seconds.
(Remark: Place the Bluetooth receiver device within 1m of the unit to connect properly.)
4. Once turntable unit is successfully connected with the external Bluetooth speakers, you will hear a short confirmation sound from the
speakers.
5. Select the desired speed
（
331/3, 45, 78
）
and place the record on the platter. The music will be heard from the external Bluetooth
speaker/headphone. In this case, the unit is automatically activated in silent mode.
6. If want to turn off
“
BT Out
”
function, long press the
“
/ BT Out
”
key on the unit or
“
”
key on the remote again, the Bluetooth
connection between unit and Bluetooth receivers will be disconnected.
Remark: “Bluetooth Out” only work with record playback. “Bluetooth Out” cannot work in Bluetooth IN
/LINE IN/USB/CD/FM function
mode.
Audio Out Operation
The audio Jacks output analog line-level signals and could be connected directly with a pair of active/powered speakers or the
appropriate input of your stereo system.
Note: The Audio Jacks are not designed to be connected directly to the passive/unpowered speakers. If connected to the passive
speakers, the volume level will be very low.
Trouble Shooting
Problem
Solution
There is no power
-Power cord is not properly connected.
-No power at the power outlet.
There is no sound from the speakers
-The speaker jack is not properly connected.
The speakers could not be connected to my
Bluetooth device
-
The device’s Bluetooth function is not turned on.
-The speakers are actively connected to another Bluetooth device.
The turntable speaker stop before the record is finished.
-Adjust the Auto-stop switch to
“
OFF
”
position.
In
“
Bluetooth Out
”
function, the unit and bluetooth
receiver do not connect successfully
-Turn the unit and Bluetooth receiver off. Follow the pairing step
again from the beginning.
-Check whether the turntable unit connect with another Bluetooth
receiver.
Don’t play disc
1.To check whether the disc is put in the proper direction.
2.To check whether there is disc in the tray.
3.
The disc is dirty. Please clean the disc.
Button does not work
It may be caused by the power wave or other abnormity, please turn off
the power and turn it on again after 10seconds.
