General Operation
CD
1. Press mode button to enter CD mode.
2. Press the button to open the CD door.
3. place a CD in the disc tray with the label facing up and press the button to close the CD door.
4. Use the controls on the unit or the remote to begin playing the loaded disc.
BLUETOOTH In
-
The first time you use your Bluetooth device with this player, you will need to connect or “pair” it with the playe
r first.
- Switch to the Bluetooth model, then use Bluetooth device to search the
“
VICTOR VW3500
”
pairing.
- There will be a prompt sound after the successful pairing.
- If the pairing device is disconnected, the unit will also issue a prompt sound.
USB
-Connect your USB stick (not included) to the USB socket for music playback.
-Record the record track in music to USB flash stick during the PHONO mode.
1.You can record the playing music from Phono record into the USB flash stick
2.Insert a USB flash stick to the USB port during the PHONO mode.
3.Short press the
“
STOP/REC
”
key on the unit or remote during the Phono record is playing.
4. Short Press
“
STOP/REC
”
key again to stop the recording and replay the recorded track
5.To delete the recorded track, long press the
“
STOP/REC
”
key during it is playing
FM
When you switch the unit to the radio mode, you can listen to the FM radio program in this mode.
1.
This radio antenna is on the back of the machine. When you need to listen to radio, please open the FM antenna.
2.
In FM mode, press the
on the unit or remote control to automatically search station. It will save the station once searching
completed.
3.
Press the
or
on the unit or remote control to select station.
LINE IN
Switching to
LINE IN
mode, use 3.5mm audio cable(not included) to connect player with other audio output devices (such as mobile
phone, computer, etc)
Turntable Operation
1. Rotate the knob to the PHONO mode. The mode indicator will be Red.
2. Select the desired speed
（
33-1/3, 45, 78
）
and place the record on the platter.
(Remark: When playing a 45 RPM record, please use the 45 RPM adapter.)
3. Remove the stylus protector from the stylus. Release the tone arm from the tone arm clip.
4. Use the tonearm lever to raise the tonearm. Move the tonearm gently to desired position over the record. Push the lift lever again to
descend the tonearm slowly onto the desired position on the record to start playing.
5. When the record is finished playback, push the tonearm lever again to lift up the tonearm. And return the tonearm to the arm rest.
Use the tonearm lever to descend the tonearm.
Remark:
1.When the Auto stop switch is “ON”, the record will stop automatically when finished. When the Auto stop switch is “OFF”, th
e record
