Victrix Pro AF ANC, Руководство пользователя

Страница: 5 / 22

Visit VictrixPro.com for more protips and/or call
VIP Tech Support at +1 (619) 339 1769
GETTING STARTED
The Pro AF™ ANC is a wired headset that offers several advanced technological features for gaming.
These added features require the headset’s ILC (in-line controller) to be powered by two (2) AA batteries.
Your ILC is tuned specifically to your headset. Do not swap it with another Pro AF. To ensure the longest
battery life operation of your Pro AF™ ANC, always remember to switch off the ILC when it’s not in use.
Forgetting to turn off the ILC will cause the batteries to run down when not in use.
However, if your batteries do fully deplete, the headset remains operational and you will still hear
your game audio through the earcup speaker drivers and your microphone will continue to operate.
Without battery power, the headset retains all of its core functions needed to play, but you will not
have access to the additional features such as ANC (active noise cancellation) or custom gain
adjustments until you replace the batteries.
Plug the microphone connector on the ILC into the left earcup of the headset. You will hear a click
when it has been fully inserted. To unplug the microphone connector from the headset, press the
two release buttons on either side of the connector and pull the connector away from the headset.
Remember to turn off your headset after use.
Plug the 3.5mm audio connector into your source. The Pro AF™ ANC can be used with any source
that accepts a 3.5mm audio output such as a PS4 controller, Xbox One controller, Audio Mixers, or
your PC using the included PC splitter cable if necessary.
Pro AF ANC will continue to perform its main functions (speakers
and voice mic will work) when turned off or out of power.
Some PCs have separate jacks for game audio output and mic input.
Use the included splitter.
Cable length is optimized for a player sitting 2-3 feet away from a
monitor. Use the extension cable if you need more cable slack.
The ILC has a round belt clip and cable adjuster attached to it. The belt clip is designed for the ILC
to be clipped onto your pocket or belt and allows the ILC to rest easily on your leg and out of the way
when not in use. You can slide the cables up or down on the belt clip to find the optimal length for
you to comfortably place the ILC.
The microphone should be placed directly in front of your mouth for optimal voice quality and perfor-
mance. (Similar to how pilots use their headset microphones) Every 1/2” (~12mm) the microphone
moves away from your mouth your voice will lower by 6dB to the players you are talking to.
PROTIP
PROTIP