VP200ESK
•
Safety Instructions
•
8
Nozzle Instructions
To Adjust the Nozzle:
• Remove the battery from the unit.
•
•
•
the medium particle and rotate clockwise again until it clicks again to get the smallest particle.
• Remove the wrench when complete.
To Remove the Nozzle
• Remove the battery from the unit.
•
•
• When the tabs and slots are lined up the wrench will be completely inserted into the front end.
•
(¼ rotation).
• Remove the wrench when complete.
To Insert Nozzle
• Remove the battery from the unit.
•
•
•
is in position.
• Remove the wrench when complete.
Cleaning Electrostatic Sprayers
cleaning the sprayer.
It is recommended that user should purchase a second tank to wash out cordless electrostatic
sprayers to prevent residual solution build up. Disconnect the storage tank from the sprayer
and use the black threaded cap that is included. Disconnect storage tank from sprayer use the
locking threaded cap to secure tank and solution when not in use.
Review chemical MSDS sheet how best to secure and store your chemical solution when not in use.
Cleaning Nozzle
remove blockage.
Example below:
recommendation is that a full tank of water is sprayed through the unit after every few days of
use to rinse any residual chemical build-up to reduce the chance of blockage.
Nozzle #1 (Dirty)
Nozzle #2 (Clean)
Sanitizers Plus
•
3590 N.W. 54th Street Suite 9 Ft. Lauderdale, FL 33309
•
https://www.sanitizersplus.com/
