Dial Thermometer Calibration
1.
Check cabinet temperature by using an accurate hand held dial or digital thermometer.
2.
Look at the dial thermometer on the cabinet grille, if it matches the thermometer test meter (+ or -1
°
F)do not
adjust.
3.
It it does not match, remove the dial thermometer lens with a small screwdriver.
4.
To adjust the temperature needle, insert a small screwdriver in the slotted screw on the needle.
5.
Hold the wide end of the needle to keep it from moving, and turn the screw clockwise or counterclockwise to
adjust as needed.
*Note:
Temperature settings should be as follows;
refrigerator
set at
38
°°
F (3.3
°°
C)
and
warmers
set at
180
°°
F
(82.2
°°
C)
.
6.
Release needle and remove screwdriver.
7.
Verify new needle setting with thermometer test meter.
8.
Replace dial thermometer lens.
Installation Checklist
After the cabinet has been installed, leveled and cleaned as described, refer to the following checklist prior to start-up.
Check for proper electrical hook-up.
Check exposed refrigeration line connections for leaks. Make sure refrigeration lines are not dented, kinked or rubbing.
Check condenser fan for freedom to rotate without striking any stationary members.
Check that cabinet is level.
Product Load
After the warmer/ refrigerator has been started and reaches the proper storage temperatures, food may be loaded. For
optimum energy efficiency, we recommend allowing a 1-1/2” clearance between the interior cabinet wall and product load.
4
Содержание HR-1D-7-EW
Страница 11: ...Wiring Diagram 8...
