106
MAINTENANCE
Brakes
Check Front Brake Lever Movement
Squeeze the front brake lever toward the handlebar and release it. It
should move freely and smoothly and should return to its rest position
quickly when released. You should feel a firm resistance in the lever
within the first 3/4-inch (19 mm) of lever travel.
If the brake lever travels too far before beginning to engage the brake,
see the
VICTORY Service Manual
, or contact an authorized VICTORY
dealer for service.
Lubricate Front Brake Lever
1. Remove right side mirtror, brake lever pivot nut and pin.
2. Remove any old grease and dirt from the brake lever and lever housing.
3. Lubricate the brake lever and lever pivot pin with VICTORY All
Purpose Grease or equivalent.
4. Reinstall the brake lever, lever pivot pin, and nut.
5. Verify proper installation of push rod (1) with large radius oriented toward lever, and small radius toward master
cylinder.
6. Torque the lever pivot pin first, using a 4mm hex socket.
7. Hold the pivot pin stationary and torque nut using a 10mm socket.
Torque (Pivot pin and nut):
5 ft-lbs (52 inch-pounds) (6 Nm)
8. Check front brake lever movement.
3/4 inch
(19 mm)
1
To Lever
To Master Cylinder
Содержание Kingpin 2004
