80
Maintenance
Fuse Replacement
NOTICE:
Use fuses with the recommended amperage to avoid damage to the electrical system.
Tip:
Use the fuse puller provided in the tool kit to remove a fuse.
1. Remove the right side cover.
2. Lift the release tab and slide the fuse box
upward to remove it from the bracket.
Release the tabs on each side of the fuse
box cover and remove the cover.
Tip:
The reverse fuse (if equipped) is located on the
debris flap at the front of the rear tire.
3. Remove the damaged fuse and seat the
new fuse firmly in its place.
4. Reinstall the fuse box cover with the dou-
ble cut-out to the left (with print readable
from right side of motorcycle).
5. Reinstall the fuse box and the side cover.
Fuse Recommendations
Fuse Application
Fuse Size
Engine
15 amp
Fuel Pump/Ignition Coil
15 amp
Lights
20 amp
Turn Signals/Horn
10 amp
Ignition
10 amp
Chassis
20 amp
Accessory
(under left side cover)
20 amp
CROSS COUNTRY ONLY
Radio
(in fairing behind headlight)
25 amp
Fuse Box Label
Fuse Box
Accessory
Fuse
(if equipped)
Содержание 2011 Cross Country
Страница 1: ...PMS 419 2011 Rider s Manual Victory Cross Country TM Victory Cross RoadsTM...
Страница 3: ...The text is printed on 100 recycled with 40 post consumer waste PCW...
Страница 5: ...1 2011 Rider s Manual Victory Cross Roads Victory Cross Country...
Страница 60: ...56 Maintenance Maintenance Log Maintenance Performed Miles Km Notes Performed by...