SETTING THE TIME
1. Pull the crown out to position
3.
The seconds hand will stop.
If your timepiece indicates the date, remember the date advances at 12:00 mid-
night, not 12:00 noon.
2. Turn the crown to position hands to the desired time.
3. Push the crown back to position
1.
(Remember to screw it back down if you have a screw-down model).
SETTING THE TIME ZONE
1. Pull the crown out to position
2.
2. Turn the crown back or forth to reach a new time zone.
3. Push the crown back to position
1.
(Remember to screw it back down if you have a screw-down model).
SETTING THE DATE
1. Pull the crown out to position
2.
2. Turn the crown and the hour hand back or forth until the desired date is reached.
3. Push the crown back to position
1.
To avoid any errors, do not perform this operation between 21.00 and 03.00
7
English
The crown has 3 positions:
1 Screwed-in position
2 Time zone adjustment back and forth, date setting
3 Hour and minute setting
Do not operate the pushers or crown when your timepiece is under water
or if it is wet.
USE OF THE CHRONOGRAPH
Single event:
1. Press pusher
A
to start the chronograph.
2. Press pusher
A
again to stop the chrono-
graph.
3. Press pusher
B
to reset to zero.
Split/Intermediate time
1. Press pusher
A
to start the chronograph.
2. Press pusher
B
to display an intermediary time, the chronograph will continue
timing.
3. Press pusher
B
again to catch up with the timing.
4. Press pusher
A
to end the timing.
5. Press pusher
B
to reset to zero.
6
English
A
B
1 2 3
