Important information for fitter:
•
I
t is recommended that only approved/qualified plumbers should install the product.
•
Incorrect installation of the enclosure will invalidate guarantee.
Carefully check the product for transport damage prior to installation.
Never install damaged panels as there is a risk of spontaneous glass breakage. The supplied
fixings/wall plugs are only for mounting directly on solid walls.
It is essential that the solid, masonry/walls be inspected for adequate load-bearing capacity
prior to every installation. The supplied fixings/wall plugs are not for use with stud walls such as
plaster board, wood, metal or fiber board.
Always seek professional advice to confirm wall type and appropriate type of fixing to be used
for installation. Always check walls for concealed utility lines (power, gas, and water) prior to
drilling the fixing holes.
•
Always protect all glass edges from damage.
•
Never stand the glass on its corners throughout the installation! Place the packing material
beneath the glass panel; never place the glass on tiles, concrete floors or similarly hard
surfaces
•
It is mandatory to check each glass panel for damage prior to installation. Never install
damaged glass panels as this could cause spontaneous glass breakage!
•
If the glass panel is damaged during use it must be replaced without delay. (Failure could
cause a risk of spontaneous glass breakage!)
Prevent damage to glass or operation of the product.
•
Ensure fittings do not hinder the movement of the door.
•
Ensure that no objects are within the range of the door opening/ closing area.
•
Avoid hitting the panels with hard objects such as mops when cleaning or tools during
assembly. Damaged panels must be replaced as failures may cause latent glass breakage.
•
Do not hit against the glass edge with hard or pointed objects (e.g. with mop handle)
Damaged panels must be replaced; damage may cause spontaneous glass breakage.
•
Do not use panels or handles to hang or support items such as drying towels or clothes.
Do not use steam cleaners, caustic or aggressive cleaning and scouring
agents, cleaners that corrode plastics, or solvents containing acetone
or turpentine or neat bleach.
•
Do not use any cleaning agents, which according to the
manufacturer's specifications may corrode aluminium or light alloys.
•
Do not use glass cleaning pastes and micro-fibre cloths to prevent
damage to glass coating system.
•
In order to prevent the build-up of lime scale, remove any remaining
drops of water after showering using a squeegee, soft cloth without
any cleaning agent.
•
After use, carefully rinse off all residue such as; liquid soaps, shampoos,
shower gels or similar cosmetic product with water to avoid deposits.
Important:
Never apply the cleaning agent for longer than necessary.
After cleaning, check all the moving elements are sufficiently greased, re-
grease, if necessary.
Recycling and disposal
Please recycle the packaging in accordance with your local government
regulations on waste handling, and follow the same advice at the end of
the products life.
For more Information
Visit: victorianplumbing.co.uk
Service/repair and inspection for safety.
•
After cleaning, check all the moving elements are sufficiently greased,
re-grease, if necessary only use acid-free grease.
Maintenance Information
Cleaning
Safety information prior to and during installation
Special information on handling glass
Safety Information for User & Installer
V1.
12
.2022
