www.viCtorstanley.CoM
CM-324
GreenSite SerieS™
fM-324
fraMerS Modern™ SerieS
aSSeMBly inStruCtionS
paGe 6 of 9
© Copyright 2007 Victor Stanley, Inc. All Rights Reserved
Should you have any problems, please contact Victor Stanley, Inc.
steP #7
#8
Once the first (2) seat sections are attched, carefully lift the bench
and lower it to the ground using (3) people. Once bench is reposi
-
tioned, have one person slide the 3rd seating section into place as
shown below. Once it is in place, align the bolt holes and attach
using the same bolt combination used in Step 2.
Attach the front of the 3rd leg casting using the same hardware as
used in Step 7. Be sure to leave the back end angled out as shown
below to allow room for the backrest to fit in place.
hand tiGhten
eXaMple ConfiGured
for uSe
2
1
hand tiGhten
aliGnMent
