DANGER
1. Avoid using the pipe stand in potentially
dangerous environments.
Do not expose
the pipe stand to rain, and do not use
the pipe stand in damp or wet locations .
Do not use the pipe stand on sloped or
uneven surfaces . Keep the work area well
lit . Allow sufficient space to operate the
pipe stand properly .
2. Secure the work, stand, and accessories.
Ensure that the pipe stand is stable and
well-supported on a level surface, and
cannot tip over . Refer to the “Tool Setup”
section .
WARNING
1. Prevent back injury.
Always use proper
lifting techniques when handling pipe
stand components .
2. Wear proper apparel.
Do not wear loose
clothing, jewelry, or anything that can
become entangled in moving parts .
3. Wear protective items when working
with the pipe stand.
Always wear safety
glasses, hardhat, foot protection, and
hearing protection .
4. Keep hands and tools away from the pipe
stand while pipe is being loaded, rotated,
and positioned on the pipe stand.
Pipe
can crush or cut fingers and hands .
5. Do not reach inside pipe ends during tool
operation.
Pipe edges can be sharp and
can snag hands and shirt sleeves .
7. Do not over-reach.
Maintain proper
balance at all times . Ensure that all controls
are easily accessible to the operator .
8. Do not make any modifications to the
pipe stand.
Do not remove any safety
guarding or any components that would
affect pipe stand performance .
CAUTION
1. The VAPS1672 pipe stand is designed
ONLY for supporting pipe sizes, materials,
and wall thicknesses as designated.
2. Inspect the equipment.
Before using
the pipe stand, check moveable parts
for obstructions . Ensure that pipe stand
components are installed and adjusted in
accordance with setup instructions . Ensure
that pipe stand components are stable and
secure .
3. Stay alert.
Do not operate the pipe stand if
you are drowsy from medication or fatigue .
4. Keep visitors, trainees, and observers
away from the immediate work area.
All
visitors should be kept a safe distance from
the equipment at all times .
5. Keep work areas clean.
Keep the work
area around the pipe stand clear of any
obstructions that could limit movement of
the operator . Clean up any spills on the
floor to prevent slips or falls .
6. Do not force the pipe stand.
Do not force
the pipe stand or accessories to perform
any functions beyond the capabilities
described in these instructions . Do not
overload the pipe stand .
7. Maintain pipe stand with care.
Keep the
pipe stand clean to ensure proper and
safe performance . Follow the instructions
for matching and lubricating pipe stand
components, if applicable .
8. Use only Victaulic replacement parts
and accessories
. Use of any other parts
may result in a voided warranty, improper
operation, and hazardous situations . Refer
to the “Parts Ordering Information” section .
9. Do not remove any labels from the pipe
stand.
Replace any damaged or worn
labels .
5
REV_B
TM-VAPS1672
/ Operating and Maintenance Instructions Manual
Содержание VAPS1672
Страница 2: ......
