Victa VAC & BLOW VBP 1226, Руководство пользователя

Страница: 18 / 28

16
2 stroke
MAINTENANCE & CARE
Features Requirements Befor
e
After finish Refuelling Monthly Y
early
If damaged As r
equir
ed
Vac and Blow Visual inspection (leaks) • •
Throttle lever Check operation •
Stop switch Check
•
Fuel tank Clean •
Air filter Check •
Clean •
•
Replace (Depending on conditions) • •
Cowling
Clean
•
Cylinder fins Clean •
Spark plug Clean & readjust gap • •
All accessible fasteners Retighten
• •
Muffler Inspect • •
Inspect spark arresting screen
• •
Clean or replace
• •
Always stop the engine before any maintenance is done on the unit.
When all parts have stopped rotating, remove the spark plug lead to
begin maintenance work.
Never attempt maintenance that is not outlined in this manual. All
repair work must be carried out by a VICTA Authorised Service Centre.
Refer to the following table for routine maintenance.
Maintenance Chart
Brush replacement
• Lever out brush at ends by use of a fl at bladed
screwdriver.
• Replace with new brush by pushing into slot.
• Brush should be held in place by the 4 spring clips.
Not
for
Reproduction