Victa MV 1200, Инструкция по эксплуатации

Страница: 8 / 16

6
MINI-VAC
USING YOUR
MINI-VAC
BEFORE YOU START
t &OTVSFUIBUUIFIBOEMFIBTCFFODPSSFDUMZ
öUUFEBOEJTöSNMZGBTUFOFEUPUIFNBDIJOF
(see assembly instructions) P5.
t "MXBZTFOTVSFUIBUUIFWBDVVNCBHJT
öUUFEUPUIF.JOJ7BDCFGPSFTXJUDIJOHPO
(see assembly instructions) P5.
t
Connect to an extension cord. Loop the
extension cord through the handle and
around the cord restraint as shown.
t "MXBZTEJSFDUUIFDPSEUPUIFSFBSBXBZ
from the appliance.
t *GBDPSECFDPNFTEBNBHFEEVSJOHVTF
disconnect the supply cord from the
mains immediately.
DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY.
t %POPUDBSSZUIFBQQMJBODFCZUIFDPSE
t %JTDPOOFDUUIFBQQMJBODFGSPNUIFNBJOT
supply.
- whenever you leave the machine;
- before clearing a blockage;
- before checking, cleaning or
working on the appliance;
- if the appliance starts to vibrate
abnormally.
t 0QFSBUFUIFBQQMJBODFPOMZJOEBZMJHIUPS
JOHPPEBSUJöDJBMMJHIU
t %POPUPWFSSFBDIBOELFFQZPVSCBMBODF
at all times.
t "MXBZTCFTVSFPGZPVSGPPUJOHPOTMPQFT
t 8BMLOFWFSSVO
t ,FFQ BMM DPPMJOH BJS JOMFUT DMFBS PG EFCSJT
It is recommended that the Mini Vac
should be connected to the mains through
a Residual Current Device (RCD) with a
tripping current of not more than 30 mA.
Always use a heavy duty extension cord.
t &OTVSFUIF.JOJ7BDJTTXJUDIFEPò
t 4XJUDIPOBUUIFIBOEMFo"MXBZTEPUIJT
from a standing position. Never while
kneeling or sitting next to the Mini Vac .
t i7BDwBXBZEFCSJTCZNPWJOHUIF.JOJ7BD
over the area to be cleared.
Cord Restraint
Not
for
Reproduction