Victa MV 1200, Инструкция по эксплуатации

Страница: 11 / 16

9
VACUUM BAG
"TXJUIBMMTJNJMBSCBHTUIFNBUFSJBMCFDPNFTDMPHHFEXJUIöOFQBSUJDMFTEVSJOHVTFBOEUIF
operating efficiency of the machine will deteriorate without simple routine maintenance.
It is good practice to unclog the bag by shaking it after each use to ensure the bag material is
BCMFUPöMUFSDPSSFDUMZ
Remove the bag from the Mini Vac and clean with a garden hose. Always ensure the bag is
completely dry before storage or use.
The vacuum bag is a consumable item. It is subject to high degrees of wear and tear and as
such will need replacing from time to time.
To reduce unnecessary wear on your vacuum bag, avoid operating the machine in a manner
that causes the bag to drag on the ground.
NOTE: Vacuuming of high wear materials is not recommended.
These materials include glass, stones, rocks or any other sharp object which will cause a high
degree of wear to the bag and will cause a rapid decline in the life of the bag.
For further assistance please contact a Victa service representative on which materials are
suitable for use.
If the bag is damaged please replace immediately. Replacement bags are available from your
Victa dealer.
MAINTENANCE AND STORAGE
t,FFQBMMOVUTCPMUTBOETDSFXTUJHIUUPCFTVSFUIFBQQMJBODFJTJOTBGFXPSLJOHDPOEJUJPO
t$IFDLUIFWBDVVNCBHGSFRVFOUMZGPSXFBSPSEFUFSJPSBUJPO
t3FQMBDFXPSOPSEBNBHFEQBSUT
t6TFPOMZHFOVJOFSFQMBDFNFOUQBSUTBOEBDDFTTPSJFT
t4UPSFUIFBQQMJBODFPOMZJOBESZQMBDF
CLEARING AN INLET BLOCKAGE
Twigs and long material may cause a blockage in the inlet chute of your Mini Vac. If this occurs
try giving the machine a gentle shake while it is still running. If this is not successful, switch your
Mini Vac off and unplug the cord at the power outlet and clear the blockage.
To prevent a recurrence of the Mini Vac blocking it may be necessary to move your Mini Vac more
slowly over the debris to be picked up.
Not
for
Reproduction