11
Starting the Edger
NOTE:
Before starting your edger read the engine chapter then set the edger
operating height!
#ONNECTSPARKPLUGLEAD%NSURETHE
lead cover fits firmly onto the spark
PLUG
2. Fill tank with fuel 2.0 litres of
unleaded fuel.
4URN/./&&SWITCHTOTHE
"ON"
4. Turn fuel tap to the
"ON"
position.
5. Set throttle to the
"Choke"
position.
0ULLTHEENGINESTARTERUNTILITENGAGES
Then pull starter cord briskley until the
engine starts.
Fuel
Tank
Spark
Plug
/./&&
Switch
Zone
Clip
Assemble starter cord & knob through the "Zone Clip" eyelet as shown. This will assist
with starting the engine & will prevent cord backlash damaging the Edger. Avoid pulling
the starter cord beyond the cord length limit. Always gently return the cord knob recoil -
Never release knob to backlash.
OPERATING
INSTRUCTIONS
Fuel Tap
Choke
Position
Not
for
Reproduction
