VICOR HD Series, Руководство пользователя

Страница: 1 / 6

UG:118 vicorpower.com Applications Engineering: 800 927.9474 Page 1
Features
n
Oscilloscope probe jack for output voltage and ripple measurements
n
Simple to use
n
Ring lug connections
Introduction
The Customer Evaluation Board offers a convenient means to evaluate the
performance of Vicor’s high density converter (HDC) Brick module and has been
optimized for user convenience. Please refer to the appropriate HDC datasheet for
performance and operating limits. The datasheets are available for downloading at
vicorpower.com .
Please refer to Figure 1 for locations of the input and output connections as viewed
from the component side. Wires may be soldered directly to the pads instead of ring
lugs if desired to minimize circuit impedances.
NOTE:
The Customer Evaluation Board has footprints for both A and B Series HDC modules, but only
one module can be populated on the evaluation board.
HD Series Brick Evaluation Board
USER GUIDE | UG:118
Written by: Michael DeGaetano
Associate Product Line Engineer
July 2014
Contents Page
Features 1
Introduction 1
Set Up 2
Recommended 3
Hardware
Thermals 3
Ordering Info 3
Test Point List 4
Bill of Materials 4