Vicon VN-301TV5, Руководство по установке и эксплуатации

Страница: 9 / 35

Chapter 1 - Introduction
The information in this manual covers the installation and operation of the VN-301TV5 Single-Channel Digital
Video Encoder. This system should only be installed by a qualified technician using common hand tools and
approved materials in accordance with national, state and local wiring codes.
The VN-301TV5 is an intelligent and rugged Digital Video Encoder. It is a state-of-the-art embedded server in
an attractive aluminum case. It is sold in a prepackaged configuration ready for analog camera connection. It
will provide a video (frame per second) rate of 30 fps. It is fully compatible with the ViconNet software
(version 5) application. For software information, refer to the ViconNet Software manual, XX113-0X (where X
is a revision number between 0 and 9). The VN-301TV5 can be networked with all models of Kollector NVRs
and DVRs, and ViconNet Workstations to create a complete system.
The VN-301TV5 complies with CE and meets requirements for an FCC Class A computing device.
Vicon strongly recommends the use of line conditioners, voltage regulators and uninterruptible power supply
(UPS) systems in the electrical power service.
NOTE: Read all instructions before beginning the installation.
How to Use This Manual
This manual was designed to provide the best overall instructions for the installation and operation of the VN-
301TV5 Single Channel Digital Video Server. The graphics and terminology used in this manual have been
carefully selected to enable a clear and distinct understanding of the VN-301TV5 and its configuration. This
manual has been formatted to present distinct methods of installation for all levels of experience installers.
Accessory Kit
The provided accessory kit contains necessary items needed to install and wire the server during installation
as follows:
Table 1-1: Accessory Kit
Part Description Quantity
Software CD ViconNet Version 5 Software 1
Installation and Operation Manual Provides instructions on installation, configuration and operation 1
Sensor Resistor Used for connection of a sensor to the VN-301TV5 1
Mounting Plate Provides permanent mounting for the VN-301TV5 1
XX159-06-05 Rev 1208 VN-301TV5 Single-Channel Digital Video Server Chapter 1 - Introduction
•
1