XX068-10-00 Rev 1100 VM614RK-2
Installation
••
5
2. Lock the baseplate into position using the 6 x 1/2 inch self-tapping screws from the accessory kit. Refer to
Figure 2. Find the upward-bent tab on the rearmost point of each side support. Thread one screw into each
tab from rear to front. Some force may be required, since the screws are cutting threads in the metal of the
side support.
3. The remaining two self-tapping screws are inserted through the front flange of the baseplate. The front flange
of the baseplate has the word FRONT stamped into it.
Figure 2
Baseplate Assembly
