■
CAMERA SETTINGS FOR VC-600, VC-600S
■
CAMERA SETTINGS FOR VC-610, VC-610S
●
Confiming the wide dynamic range setting 3
WDR(ON)
WDR is working
WDR(OFF)
WDR is not working
●
Setting gain control (AGC) 4
For adjusting the sensitivity of the camera.
Use this setting for shooting in dark environments.
ON
Normal Setting
OFF
Set this when there is excessive noise
●
Compensating for backlight 1
ON
When back light is too bright
OFF
Normal setting
CAUTION : It will be correctly set by adjusting level volume 5.
●
Confirming the iris setting 2
ME(ON)
When DC auto-iris lens is installed
AE(OFF)
When fixed iris lens is installed
●
White balance setting 3
ATW (ON)
Use this under light source below 2500K and over
9500K of natrium.
AWB (OFF)
Use this under light source between 2500K and
9500K of fluorescent lamp, incandescent light.
●
Setting gain control (AGC) 4
For adjusting the sensitivity of the camera.
Use this setting for shooting in dark environments.
ON
Normal Setting
OFF
Set this when there is excessive noise.
●
Adjusting level volume 5
If the entire image is too dark or bright, or the backlight
compensation is not correct, you need to adjust the level volume.
CCW (LOW)
Closes the lens iris, making the entire image darker
CW (HIGH)
Opens the lens iris, making the entire image brighter.
●
Confirming the iris setting 1
ME(ON)
When DC auto-iris lens is installed
AE(OFF)
When fixed iris lens is installed
●
White balance setting 2
ATW(ON)
AWB(OFF)
Use this under light source below 2500K and over
9500K of natrium.
Use this under light source between 2500K and 9500K
of fluorescent lamp, incandescent light
●
Confirming the iris setting 1
DC IRIS(ON) When DC auto-iris lens is installed
EE(OFF)
When fixed iris lens is installed
NO. FUNCTION
1
BLC
OFF
ON
2
AE/ME
AE
ME
3
ATW/AWB AWB ATW
4
AGC MAX
OFF
ON
DIP S/W
ON
OFF
1 2 3 4
