Vicon VAX-1D, Руководство по установке и обновлению

Страница: 21 / 33

Getting Started
9
Browser Version Supported Notes
Mozilla Firefox 20.0+ Yes
Microsoft Internet
Explorer
6.0 to 9.0 No No HTML5 Support
Microsoft Internet
Explorer
10.0+ Yes Note: IE10 in Modern UI (Windows 8)
is not supported. The desktop version
however is fully supported. Vicon
browser of choice.
Microsoft Edge 20.0+ Yes Note: Some issues with browsing to
localhost address via DNS name. IP
address or remote client work fine. No
Silverlight support.
Apple Safari 5.0 (Mac/
Windows)
Untested
Apple Safari 6.0 (Mac) Untested
Blackberry Mobile Any Untested
Epiphany (Linux) Any Untested
Konquerer (Linux) Any Untested
Opera (Any OS) Any Untested Untested although newer webkit based
version (11.0+) may work
Puffin (IOS/
Android)
Any Untested Will work with some advanced manual
setup, but poor end User experience
Accessing the Server
Once you have ensured you have a browser that supports the Vicon Access Control software, accessing
the Vicon Access Control software is very simple. If you are accessing the server from the PC it has
been installed on, a start menu link is provided, otherwise you will need to enter the address manually
into your web browser.
Accessing Vicon Access Control From the PC the Server Software is Installed on:
During installation a shortcut is placed in your start menu for Vicon Access Control. The link for
Vicon Access Control can be located by clicking Start -> All Programs -> Vicon Access Control and
finally clicking on "Launch Vicon Access Control"
Windows 8/8.1 Users
Windows 8/8.1 hides the shortcut by default within the Metro UI start screen. The shortcut can be
located by typing
'Launch'
within the start screen and selecting
'Launch Vicon Access Control'
.
If you wish, you can pin this shortcut permanently to your start screen by right clicking and
selecting 'Pin To Start.'
Accessing Vicon Access Control From a Remote PC:
Open your web browser and within the address bar enter the address of the Vicon Access Control
Server using the format: https://NameOfTheComputer:11001
Alternatively, you can use the IP address of the server if the server is using a static IP address using
the format: https://192.168.1.100:11001
Example 1.1. Accessing Vicon Access Control server remotely
https:// ComputerName :11001 (default port is 11001)