background image

 

Introduction 

 
The information in this manual provides quick installation and setup procedures for the V940B series network 

cameras. These units should only be installed by a qualified technician using approved materials in 
conformance with federal, state, and local codes. Read these instructions thoroughly before beginning an 

installation. Always refer to Vicon’s website to assure you have the most up-to-date manual, www.vicon-
security.com.
 

The V940B Series Bullet Camera adopts progressive scan CMOS sensor with an internal HD motorized zoom lens. 

The camera has an internal Smart IR technology that provides 98 ft/30m IR distance. The IR LEDs output power 

can be adjusted automatically according to the brightness of the scene so that the IR LEDs do not work at full 

capacity. The power consumption of the complete unit is greatly lowered and the service life is lengthened. 

 

V940B  Series  offers  2MP  cameras,  4MP  cameras  and  5MP  cameras;  the  5MP  cameras  can  support  up  to 

2592×1944@30fps video output. All cameras use H.265/H.264/M-JPEG encoding, providing output with excellent 

definition and color reproduction, more detailed and accurate information and the accuracy of smart analysis that 

can, effectively, be guaranteed. 
 

V940B Series cameras boast smart functions, including camera tampering, to detect if the camera/lens has been 

moved, blocked, low/high brightness or defocused; intrusion detection, providing protection for key areas; and 

line  cross  detection,  providing  border  protection,  which  are  important  features  for  many  enterprises.  These 

cameras can be widely used in sites that demand high definition image quality in low lighting environments, such 

as ordinary buildings, supermarkets, hotels, shops, parks, schools, factories, warehouses, underground parking 

lots, etc. 

 
The compact design makes it easy to install and provides easy camera adjustment of the monitoring angle using 

the integral mount. 
 

 

System Requirement 

 

Configuration of the computer to display image and control the camera:   
CPU:
   

  Intel Pentium 4, 2.4 GHz or above 

RAM: 

  512MB or greater 

Network Port: 

  100M Ethernet port 

Operating System:  Microsoft Windows 10, Windows 7, Windows XP 

IE browser version: Microsoft Internet Explorer 8.0 or above 

 

 

 

Содержание V940B















Отзывы: