Vicon V930D, Руководство пользователя

Страница: 33 / 70

33
To create a motion or mask window, follow the steps below:
1. Click the right button of mouse to display the mouse menu.
2. Select New Motion (or Mask) window in the mouse menu.
3. Click and drag mouse to designate a motion area.
• Motion Detection Setting
The behavior for each window is defined by adjusting the Threshold and Sensitivity, as described below.
The combination of these parameters defines whether motion has occurred; motion detection frequency is
increased with a high sensitivity and a low threshold.
A motion index is a set of parameters describing Window Name, Type, Threshold, Sensitivity, and Dwell
Time. Window Type is Include at the Motion, and Exclude at the Mask window.
- Threshold: Sets up the threshold for the motion detection. Threshold judges the amount of change
in the area. Select from 1-100; a lower number increase frequency of alarms.
- Sensitivity: Sets up the sensitivity for the motion detection. Sensitivity measures the
level of motion in each motion area. Select from 1-100, 1 being the least sensitive to
alarm condition.
- Dwell Time: Set the hold time an event lasts from the point of detection of a motion
(hold time).
You can also modify or delete a motion index. It can be deleted using the table and modified by selecting
it and changing parameters in the table. Change the size of the mask by dragging the borders or corners
of the mask or click in the center of the mask to change the location; select delete button to completely
remove the mask. When the settings are complete, click Save, or click Reset to revert to previously
saved settings.
To exclude parts of the Include window, select the New Mask at the mouse menu and position the Mask
window as required.