9
DHCP
The Dynamic Host Configuration Protocol (DHCP) is enabled by default when the camera is delivered. If a
DHCP server is deployed in the network, the camera can automatically obtain an IP address from the DHCP
server.
To manually configure DHCP, follow the steps below:
1.
Click Setup > Network > Network.
2.
Select DHCP from the Obtain IP Address drop-down list.
3.
Click Save.
IPv6
1.
Click Setup > Network > Network.
2.
By default the IPv6 mode is set to Manual.
3.
Enter the IPv6 address; set the prefix length and default gateway. The IP address must be unique on the
network.
4.
Click Save.
Port
1.
Click Setup > Network > Port.
2.
Configure relevant port numbers.
3.
Click Save.
