Vicon V661D-312N-1, Инструкция по установке и эксплуатации

Страница: 5 / 28

(Flush Type
Hole: Φ 116mm)
1. Loosen the three Torx screws as shown in Figure 1.
Do not remove the screws. Lift the trim ring off the mount and set aside.
2. Drill the mounting location using the supplied drilling guide.
3. Attach the surface mount to the ceiling as shown in Figure 2.
M5x30 fasteners are supplied; only use if they are suitable for the mounting surface.
4.
Turn the locking flaps outward as shown in Figure 3 and 4 to attach the bottom case to
the surface mount.
Insert the bottom case into the surface mount as shown in Figure 2.
5
5. Install the trim ring onto the surface mount and tighten the Torx screws.
- Surface Mount
Suface mount
A