Vicon V661D-312N-1, Инструкция по установке и эксплуатации

Страница: 25 / 28

PRECAUTIONS
Before installation, carefully read the manual to ensure correct operation and setup, heeding all warnings
and instructions.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Ensure manual is kept in good condition for future use.
Do not install the device near any heat sources such as radiators, heat registers, stoves, or other equipment
(including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
Should any liquid get into the housing, immediately disconnect the device from the power supply and have it
checked by authorized personnel before reusing.
Do not install the device in a place where it is exposed to gas or oil.
Installation and servicing by authorized personnel only, adhering to local safety regulations.
Unless you are an authorized technician, never try to dismantle the device. To avoid electric shock, never
remove the screws or covers.
If a camera, do not expose the device to radioactivity. It will cause serious damage to the CCD.
Use Certified/Listed Class 2 power source only.
Cleaning
Clean the device with a slightly damp soft cloth. Use a mild household detergent. Never use strong solvents
such as thinner or benzene as they might damage the finish of the unit.
26