V2008-WNL-LPR/V2008-W1250-LPR Quick Guide
5
No
Name
Description
1
Lens
Lens (V12-50VF-P supplied with V2008-W1250-LPR) is attachable to the
camera’s lens mounting ring.
2
Mount Screw Hole
Both top and bottom of the camera housing have one mount screw hole
(1/4”-20) for mounting the camera. With V2008-W1250-LPR, use
mounting screw provided to mount camera on to camera mounting plate
of HPOE-100 housing.
3
DC (Auto) Iris
Control Port
When mounting the lens, connect the DC iris control line with the port.
4
Micro SD Card Slot
Insert a micro SD card (supplied) into the slot for recording and file
storage.
5
Reset Button
Press the button for 1 second to reboot the camera.
Default Button
Press the button for 6 seconds to restore camera’s settings to factory
default settings.
6
ABF
Press the button for approximately 1 second to get the right focus
automatically and immediately.
7
DI/DO Port
DI/DO (Digital Input/Output) ports are equipped for external devices,
e.g., smoke detector, siren, microphone.
•
RS-485:
Via “-” and “+” ports under “RS485”; connect to
external RS-485-based device that can be used to perform
pan/tilt action.
•
Alarm Out
: Via
“
COM
”
and
“
AO
”
ports; connect to
external device to be triggered through alarm output signals.
•
Alarm In
: Via
“
GND
”
and
“
AI
”
ports; connect to external
device that can trigger alarm input signals.
•
Audio In
: Via
“
+” and
“
”
ports; connect to external
device such as microphone that receives sound for camera.
•
Audio Out
: Via
“
+” and
“
”
ports; connect to device
such as speaker to transmit sound.
8
Status LED
Solid Red
Indicates
boot up
is running. After 2 ~ 3 seconds:
-
Solid Red to Flashing Green if boot up is normal.
-
Remains Solid Red if an error occurs.
-
Turns off 3 minutes after a successful boot.
Flashing Amber Indicates firmware upgrade is running.
9
12 VDC or 24 VAC
Port
Power the camera via
12 VDC
or
24 VAC
power source.
10
RJ-45 Ethernet/
PoE Port
Connect an Ethernet cable terminated with RJ-45 connector to the PoE
RJ-45 port for both power supply and network connectivity purposes
simultaneously.
11
LED Indicators
Solid Green
Indicates a live connection is established.
Flashing Orange Indicates data is being transmitted/received
between camera and the network.
Table 1 - 1: Parts Pictorial Index Description
