Vicon V1599, Руководство по установке и эксплуатации, Страница: 21 / 80

10
•
V1599CDU Communication Distribution Unit Pilot Ultra XX189-00-XX
V1599CDU Communication Distribution Unit
The V1599CDU Communication Distribution Unit is the network interface between the V1599CPU and the
CCTV system. The V1599CDU houses the modules that communicate with receivers, keypads, printers,
alarm devices and other CCTV components. The number and type of other modules (serial, video, alarm,
titler modules) depends upon your system needs. The various modules and accessories are listed in the
Introduction section.
The most common configurations of the V1599CDU are the pre-configured typical and hot standby
configurations. The typical configurations contain a power module, a network module and slots for up to 11
modules. The hot standby configurations provide immediate switchover support in the event of failure of
application card(s).
Typical Configurations
The card cages for all five pre-configured typical configurations are shown in the front and rear panel figures.
The number of devices that may be connected to each serial module are the varying factor in the five
configurations, as shown in Table 2.
Front Panel for Typical Configurations
ALARM CONTROL
POR
T
2
ALARM CONTROL
POR
T
1
ETHERNET 1
ETHERNET 2
TDT
CONTROL
POR
T
1
TDT
CONTROL
POR
T
2
VIDEO CONTROL
1
VIDEO CONTROL
2
VIDEO-IN
SERIAL
PORT 1
SERIAL
PORT 2
SERIAL
PORT 1
SERIAL
PORT 2
Rear Panel for Typical Configurations
Figure 5: Front and Rear Panels for Typical Configurations