Quick Guide
Programming
For detailed instructions, see Surveyor2000 Programming Manual.
Programming Steps Performed with the Control Device Only
Note: Refer to V1300X-DVC and V1300X-RVC Intelligent Remote Control Panels Instruction Manual X777 and/or
V1400X-DVC System Console Instruction Manual X923 for operations, depending on the control device being used.
Storing Presets:
A preset is a pre-programmed camera position.
Presets may be created either directly from the control device or through the programming menus. Since the control
device method is usually used, it is shown here:
Select a monitor.
Move camera to
desired position.
Select a camera.
Enter desired
preset number.
Deflect the joystick in either
horizontal direction until desired pan
speed is attained. Hold in place.
Press and hold the
autopan key.
Release the
autopan key.
Release
joystick.
Programming Autopan Speed:
Sets a constant pan speed for autopan operation.
Programming Sectors:
A sector is a specific portion of the 360˚ viewing area.
Pan the selected
camera to left
end of sector 1.
Enter preset “96”.
This defines the left
end of sector 1.
Pan to the
right end of
sector 1.
Pan to the
right end
of sector 2.
Press the autopan key. This defines the
right end of sector 1, the left end of sector
2 and displays the title of sector 2.
Press the autopan key. This defines the
right end of sector 2, the left end of sector
3 and displays the title of sector 3.
Repeat the “pan right-press A/P” steps for all desired
sectors (the maximum is 16). At the last desired sector,
hold joystick to the right until the unit stops.
When finished press the autopan
key until the title of sector 1 is
displayed again.
Programming Autopan Limit Stops:
Limit stops control how far the Surveyor2000 can pan.
Pan the camera to
the left end of the
autopan sector.
Pan the camera to
the right end of the
autopan sector.
Enter preset “98”.
Enter preset “99”.
Enter preset “98”.
Enter preset “99”.
Programming Continuous Rotation Panning:
Removes the pre-programmed limit stops.
Vicon Industries Inc. 89 Arkay Drive, Hauppauge, NY 11788
2
1
1
6
1
2
1
2
1
2
3
4
3
4
7
8
2
3
4
5
2
3
4
