6
2.1.2 Ceiling Mounting
The ceiling mounting plate must be attached to a structural object such as concrete that will support
the weight of the mount and dome camera.
This figure shows how to twist and lock the housing
with pipe.
1. Select a suitable mounting location
and verify there is sufficient cable to
connect with cables from the
housing.
2. Mark and drill mounting holes on the
surface using the ceiling mount
flange as a template.
3. Pull out cables required to connect to
the dome camera from the ceiling.
4. Attach the ceiling mount bracket
using plastic anchors and screws.
5. Attach 1.5 inch adapter to the pipe
and fix it using set screw of the
adapter.
6. Route camera cables through the
pipe and attach the camera to
adapter; fix them using set screw of
the adapter.
7. Attach
housing’s safety wire to the
ceiling mount’s 6x35 tapping screw.
8. Make all connections and organize
cables.
9. Lock hexagonal nut of the ceiling
mount bracket to secure camera,
attached pipe and ceiling mount
bracket.
