background image

19 

• Using the Reset button:  

Follow the instructions below to reset the network camera to the factory default settings using the 
Reset button.  

1. Switch off the network camera by disconnecting the power adapter.  

2. Open the Micro-SD card cover.  

3. Press and hold the Reset button (SW1) on the board with your finger while reconnecting the 

power.  

4. Keep the Reset button (SW1) pressed for about 2 seconds.  

5. Release the Reset button (SW1).  

6. The network camera resets to factory defaults and restarts after completing the factory reset.  

CAUTION:

 When performing a Factory Reset, you will lose any settings that have been saved. (The 

unit now obtains the IP address automatically via DHCP.) 

 

System Requirement for Web Browser  

• Operating System:

 Microsoft Windows OS Series  

• CPU:

 Intel Core 2 Duo 2GHz or higher, 1GB RAM or more, 10GB free disk or higher  

• VGA:

 AGP, Video RAM 32MB or higher (1024x768, 24bpp or higher)  

 

General Performance Considerations  

When setting up your system, it is important to consider how various settings and situations will affect 
performance. Some factors affect the amount of bandwidth (the bit rate) required, others can affect 
the frame rate,  and  some  affect  both.  If the  load  on  the  CPU  reaches  its maximum, this  will  also 
affect the frame rate.  

The following factors are among the most important to consider:  

• High image resolutions and/or lower compression levels (or high bitrates) result in larger images. 

Frame rate and Bandwidth affected.  

•  Accessing  both  Motion  JPEG  and  H.264  video  streams  simultaneously.  Frame  rate  and 

bandwidth affected.  

• Heavy network utilization due to poor infrastructure. Frame rate and Bandwidth affected.  

• Heavy network utilization via wireless router due to poor infrastructure. Frame rate and bandwidth 

affected.  

• Viewing on poorly performing client PCs lowers perceived performance. Frame rate affected.  

 

More Information  

For more information, please see the network camera User’s Manual, which is available on Vicon’s 
website, 

www.vicon-security.com

, under Documentation.   

 

Содержание SN240D





















Отзывы: