7-5. COMMUNICATION (OPTION)
This sets up communication using the RS-485 format.
Protocol
- RS-485 protocol (PELCO-D).
Address
- Select the camera ID (001 - 255).
Baud Rate
- Select serial communication speed (2400/4800/9600/19200/38400/57600/115200).
Databit
–
Internally fixed.
Parity -
Select OFF/ODD/EVEN. This is used to find the Bit to extract an error on the keyboard.
Stopbit
–
Internally fixed.
Key for Keyboard Controller:
MENU
Turn joystick handle clockwise, ZOOM/TELE
ENTER
Turn joystick handle clockwise, IRIS/CLOSE
OSD Cursor Movement
Joystick Up/Down/Left/Right
7-6. CAMERA ID
Set the camera ID ON or OFF. When ON, the
CAMERA ID SETUP screen can be displayed.
A title of 64
characters per line can be configured.
Use the joystick to navigate the cursor.
Pushing centrally on the joystick will allow selection
of that character.
The arrows at the bottom allow you to move the
cursor without changing the character.
CLR
Select CLR to insert a space.
POS
Select POS to return to the live view screen to adjust the location of the camera
ID title display using the joystick. (If it is moved too
much to the right side or down,
the ID might move off the screen.)
8. EXIT-MENU
SAVE
Save the settings (settings are saved)
NOT SAVE
Exit menu without saving.
CANCEL
Changes (restore settings to those selected when the menu was displayed)
BACK
Return to previous menu.
9. LANGUAGE
Select a language from English, Spanish, Russian, Portuguese, German, French, or Japanese.
10. VERSION
Camera version information is displayed.
Setup Menu 21
CAMERA ID SETUP
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789`~!@#$%^&*()-
_=+<,>.?/;:’”
CLR POS
RETURN
