BLOCK DISP
When selected ON, motion detection frame display selections are available. Displays the results of
the motion detected in each block.
MASK AREA
This is used for setting the no-detection area. The active point (MASK AREA 1~96) is displayed.
Move from point to point using the joystick. Press the joystick to select edit point (no-detection area).
MONITOR AREA
Set the position of the motion detection area. Select the area to be set up and turn area mode ON.
The size of the frame can be adjusted using the Top, Bottom, Left and Right sliding scales.
7. SYS SETTING
7-1. SYNC MODE
Select how the camera is synchronized with other cameras in the system. External synchronization
(line lock) is a function that synchronizes the phase between an output video signal and an external
reference signal.
INT
Using this mode, timing is controlled by internal electronics in the camera; synchronization is not
implemented with multiple cameras.
LL
In Line Lock mode, LL is used to synchronize the vertical sync signal with the AC power supply with a
power line frequency of 60 Hz (for the NTSC format) or 50 Hz (for the PAL format).
Line Lock is not
available when using a 12 VDC power supply.
Use line lock mode to minimize color rolling.
PHASE
- Use the sliding scale to select a value from 0 to 524.(PAL format: 624)
7-2. LENS
Set the lens type.
AUTO
When Auto is selected, there are further menu options.
MANUAL
Allows manual adjustment of lens.
Do not select this option
.
7-2-1. MODE
AUTO
Adjusts the iris in accordance with the subject brightness.
OPEN
Fully opens the iris.
CLOSE
Fully closes the iris.
7-2-2. ADJUST
When performing the automatic mechanical iris adjustments, a suitable convergence speed (how
fast the lens responds) for the lens installed is calculated. View a high-brightness subject, which will
make the
brightness of the entire screen uniform.
-Check that the scene conditions are sufficiently bright and stable.
7-2-3. SPEED
Manually sets the convergence speed for how fast the lens responds to lighting changes (autoiris).
7-3. FLIP
Digital Flip (rotation state) can be selected to be OFF/V (top/bottom reversal)/H (left/right reversal)/ HV
(rotation by 180 degrees).
7-4. LCD/CRT
Select monitor mode of LCD or CRT.
20 Setup Menu
