Vicon ROUGHNECK V-CELL-HD-B, Руководство пользователя

Страница: 70 / 81

70
- Restart: The unit is restarted without changing any of the settings. Use this method if
the unit is not behaving as expected.
- Reset: The unit is restarted and most current settings are reset to factory default values.
The settings that are not affected are:
* the boot protocol (DHCP or static)
* the static IP address
* the default router
* the subnet mask
* the system time
- Default: The default button should be used with caution. Pressing this will return all of the
network camera's settings to the factory default values (including the IP address).
• Upgrade
Upgrade the camera by importing an upgrade file and pressing the Upgrade button. During the upgrade,
do not turn off the power to the network camera. After waiting five minutes or longer, try to access the
camera again.
To perform an update for multiple cameras at one time, use the SmartManager discovery and update tool
and select them using the SHIFT and CTRL keys (see SmartManager manual for details).
• Backup
Click the Backup button to save setting values that users enter to the network camera to a user
PC.
• Restore
Click the Restore button to import and apply setting values saved to a user PC.
• Optics
Click the Calibrate button when the Fine Focus fu nction can’t adjust the focus.
Note:
Backup and Restore can only be used on the same unit running the same firmware. This feature is
not intended for multi-configurations or for firmware upgrades.