14
|
ViconNet Nucleus Installation and Configuration Guide
2. Fill in your company details.
3. Fill in your user name.
4. Make note of the two user codes that are on the ViconNet
Registration
screen. You will need these to complete registration.
Note
Licensing is done through Vicon’s website. On
www.vicon-security.com
, go to
the Support tab and select Software Registration and follow those
instructions. Be sure to have the License ID and password that is on the label
of the software CD jewel case. You will need these to register. Follow the
prompts.
5. Enter the six license numbers generated from the registration process into
the six License Number fields of the
Registration
window, and click
.
The application automatically restarts in order to implement the
new registration and enable the functionality of your purchased application.
Note
If your system includes third party camera(s), they need a license (VN-CAM-
LIC) and to be registered after the software registration is completed. Third
party cameras only need to be registered once in the Nucleus for the entire
system.
Modifying the System Configuration
The ViconNet system default configuration can be modified, depending on
your requirements, as described in the following sections. This site will be
configured as the Nucleus.
Configuring the Network Setup
The network setup parameters are configured individually for each device in
the system, using the ViconNet application installed on each device. When
setting up a network, this unit is assigned as a
Nucleus
and the other devices
in the network must point to it. Each device (either a transmitter or a
Workstation) has the option to input the Nucleus IP address.
Devices that share the network can connect to the same Nucleus and form a
system, which enables them to connect to each other. This includes the
ability to synchronize multiple devices with the Nucleus time or update all the
time settings to another time zone.
To configure the network setup, you must specify both the master Nucleus IP
on all devices and may choose to specify the backup Nucleus IP addresses
on the device running the master Nucleus. The backup Nucleus setup is
