Vicon Motion Systems
Page 7 of 8
Waste Electrical and Electronic
Equipment (WEEE) (applicable
in the European Union and other
European countries with
separate collection systems)
The use of the symbol as a
marking on the equipment,
accessories or literature
indicates that this product
and its electronic accessories
(e.g. USB cable) may not be treated as
household waste. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling
of this product.
Household users should contact either
their retailer where they purchased this
device, or their local government office,
for details of where and how they can
take these items for environmentally
safe recycling.
Business users should contact their
supplier and check the terms and
conditions of the purchasing contract.
This device and its electronic
accessories should not be mixed with
other commercial waste for disposal.
EU Declaration of Conformity
0088 Medical Devices
Directive 93/42/EEC as
amended by EU Council Directive
2007/47/EC of 5th September
2007 and Electromagnetic
Compatibility to EMC Directive
2014/30/EU
We, Vicon Motion Systems Limited
Unit 6,Oxford Industrial Park, Yarnton,
Oxford, OX5 1Q, United Kingdom
Declare that the VICON SAT Interfaces
(supplied as Lock and Lock+)
manufactured by VICON MOTION
SYSTEMS LIMITED meets ANNEX V and
VII Section 5 of the Medical Devices
Directive 93/42/EEC in that the Quality
Management System has been
approved by Lloyd’s Register Quality
Assurance, a notified body of the
European Union (Reg No. 0088) for the
manufacture and support of the
aforementioned CLASS 1(m) Medical
device.
below detail the
product configurations and software
options that conform to the metro-
logical requirements of the Directive.
This declaration of conformity is issued
under the sole responsibility of the
manufacturer.
VICON MOTION SYSTEMS LIMITED
has
tested and demonstrated that all
products of its own manufacture meet
2014/30/EU:
Electromagnetic Compatibility to:
EN60601-1-2:2007
General Requirements for Safety to:
EN60601-1:2006 + A1:2013
Thomas Shannon TD PhD FIE (Aust)
CPEng (Biomed.)
Director of Compliance
22 February 2018
Not for use in an operating theatre
anaesthetic gas or oxygen-rich
environments. Not for use where there is
a risk of compromising the essential
performance of medical electrical
equipment. Not suitable for use in high
magnetic flux, ionising radiation, sterile,
or life- or safety-critical environments.
Product configurations and
software options
Conformity of the Metrological
Performance of CLASS 1 Products
Manufactured in Accordance with
Annex VII, Section 5 of the Medical
Devices Directive 93/42/EEC of the 14th
June 1993.
We, Vicon Motion Systems Limited
Unit 6 Oxford Industrial Park, Yarnton,
Oxford, OX5 1Q, United Kingdom
declare that the VICON SAT Interface
(supplied as Lock and Lock +)
manufactured by VICON MOTION
SYSTEMS LIMITED has been tested prior
to shipment and meets the following
metrological performance:
Measurement Criteria
Supporting software: Blade 3.2 or later,
Nexus 2.2 or later, Tracker 3.1 or later.
Analogue Digital Conversion
Resolution to ± 10 mV mean and ± 10 mV
(1 Standard Deviation).
Synchronization
Difference within one video frame.
Safety information
The following guidance helps you to
ensure the safe operation of your Vicon
system, including the use of Lock+.
To avoid introducing a safety hazard and
possibly damaging the system, please
ensure that an adequate and good-
quality alternating current (AC) power
source is available.
For guidance, see the ratings statement
on the rear of the connected PoE or
PoE+ unit. Also ensure that any
computers and peripheral devices are
set to be electrically rated to operate
with the AC power available in your
location.
When working with Vicon systems,
observe the following safety
precautions:
❙
To prevent electric shock, plug all
system components into properly
grounded power sources. These
cables must be equipped with three-
prong plugs to ensure proper
grounding. Do not use adapter plugs
or remove the grounding prong from
a cable.
❙
Ensure nothing rests on the system
cables and that cables are not
located where they can be stepped
on or tripped over.
❙
Do not spill food or liquids onto any
electrical component of the system. If
any component gets wet,
immediately contact Vicon Motion
Systems or your nearest agent or
distributor for advice.
❙
Do not push any objects into the slots
of any unit of the system. Doing so
can cause fire or electric shock by
shorting out internal components.
❙
Keep all system components away
from radiators and heat sources, and
do not block cooling vents. Avoid
placing loose papers underneath any
components. Do not place any
components on closed-in units or on
a bed, chair, etc.
❙
Replace fuses with the same type and
rating for continued fire protection.
❙
Do not use outside, near water, in an
environment exposed to anesthetic
or other explosive gases, or in mobile
applications.
