Vicon KRX-3, Руководство по установке и эксплуатации

Страница: 19 / 38

XX184-00-00 KRX-3 Video Decoder Chapter 4 - Operation
•
11
Configuring the ViconNet (IP/LAN) Version
The KRX-3 is shipped with one CD that contains the ViconNet Version 4 software needed to setup your IP
system, including the application setup, the firmware and setup software (VNSetup). Ensure that the ViconNet
Workstation meets the minimum requirements, and is running the ViconNet application (Version 4)
(VNSetup). VNSetup is found on the included CD. Refer to appropriate ViconNet documentation.
Network Considerations
The KRX-3 can be connected to any ViconNet network (Version 4 software) via the VMC.
The default parameters on the KRX-3 are:
IP address: [1.1.1.2].
Nucleus IP address: [1.1.1.1].
On first startup, the KRX-3 will attempt to establish connection to the Nucleus with the default address
(1.1.1.1). Connecting it to an active Nucleus is done through the VNSetup utility.
Groups and Users Restrictions
ViconNet allows creating Multiple Groups and Users in order to limit the rights to different levels. For more
information on how to create Users and Groups, refer to the latest revision of ViconNet VMC manual XX177.