262
•
Configuring the Network
XX185-30 Rev 807 Kollector Lite
3. In
the
Password
field, enter your assigned password.
NOTE:
If you are an administrator entering the application for the first time, you do not need a password.
After logging in as
admin
, it is recommended to assign yourself a password, as described in the
Defining Users section in Chapter 3, Configuring the ViconNet System.
4. Click
. The ViconNet
Main
window is displayed.
5. To open the
Network Settings
window, follow steps 1 through 3 in
Step 1: Setting the Site IP Addresses
,
in the
Creating a New Network
section in
Chapter 3, Configuring the ViconNet System
.
6. In
the
IP Address Settings
area, select the
Obtain an IP address automatically
radio button.
7. Click
. The application will reboot.
8. Repeat steps 1 through 5 to reopen the
Network Settings
window. The completed DHCP setup should
look as shown below, with the IP address displayed in the
Network Settings
area.
NOTE:
Once ViconNet has an IP address, it will no longer use one assigned by Windows or by the DHCP
server. Forcing a new DHCP detection of the Kollector Lite requires first manually setting the IP
address, so that it starts with the new manual address. To obtain a new address, repeat the steps in
this procedure.
Содержание KollectorLite XG
Страница 2: ......
Страница 232: ...224 Playing Back Recorded Video XX185 30 Rev 807 Kollector Lite ...
Страница 260: ...252 Printing Exporting Frames and Creating Video Files XX185 30 Rev 807 Kollector Lite ...
Страница 266: ...258 Configuring the Personal Firewall XX185 30 Rev 807 Kollector Lite ...
