Vicon KollectorLite XG, Руководство пользователя программного обеспечения

Страница: 110 / 282

102
•
Configuring the ViconNet System XX185-30 Rev 807 Kollector Lite
9. (Optional) For each device selected, enter a unique secondary ID ( 2
nd
ID ). This ID can be any number
up to 3 digits.
NOTE: If you try to give two devices the same secondary ID, the conflicting lines are colored pink, as
shown below. In addition, if the devices, which have the conflict, are placed in two Groups, the
Group icons in the
Group Set list are also colored pink.
10. (Optional) You can reorder the devices the devices in the Group by clicking on the up and down
arrows to the right of the list.
11. Click Save or Save and Exit .
NOTE: Double-clicking the device name in the device tree does not add it to the group.
After a Group Set has been created as the Working Set, you can select to display either the device name or
secondary ID or both
Main window Groups list.
Exiting the Groups Editor Window
There are two ways to exit the Groups Editor window:
•
To save your changes, click Save and Exit .
•
To close the window without saving your changes, click Close . In this case, a confirmation message
appears to verify that you do not want to save your changes.
In both cases, the Groups Editor window is closed.