Vicon kollector KOL-8000, Руководство по эксплуатации

Страница: 32 / 72

Reaction Mode
If you want to record only the images on sensor-detected camera in full frame speed
instead of the currently recording images at the standard frame rate while the sensor is
activated, choose the
Intensive mode. If you want to record both current images and all
images on sensor-detected camera, choose Normal mode. The Intensive mode is highly
recommended for effective monitoring of sensor events to increase the recorded frame rate
and automatically shut off recordings on other cameras.
Sensor Recording Time
Sets the preset duration for recording time when a sensor is triggered. Maximum
recording time is 5 minutes. When the preset recording time is up, the recording of
images detected by sensors halts and the system returns to the previous recording mode
until the sensor is triggered again.
Sensor-Detected Screen
In case a set of four cameras is installed on a system and the images from camera 3 are
being recorded with the
Intensive mode:
1.
Full Screen Mode
If the sensor connected to camera 1 detects any intrusion, the recording from camera 3
will immediately halt and recording from camera 1 starts and is displayed in full screen
mode. Once the recording on camera 1 is done, the system will return to the original
display mode and the recording on camera 3 will resume.