Vicon IQeye Alliance-mini Series, Инструкция по установке и эксплуатации

Страница: 7 / 16

7 Mounting Options
The Alliance-mini is designed to be used in one of the following
configurations:
1. Surface mounted to any interior durable surface wall.
2. Surface mounted to a plenum or other durable ceiling surface.
3. Used in conjunction with a ¾” NPT threaded pipe (not included) as part
of a pendant mount solution with the use of the Alliance-mini Pendant
Mount Adapter Multi-Pack (modeIs IQD4-PB or IQD4-PG, black or beige,
respectively).
Surface Mount Installation
1. Mount the Alliance-mini camera base to the desired wall or ceiling
surface using the supplied or equivalent mounting hardware.
Pendant Mount Installation
The Alliance-mini Pendant Mount adapter is designed to easily mount the
camera via a ¾” NPT conduit (not supplied).
1. Pull the PoE Ethernet cable through the top of the Pendant Mount and
attach the Pendant Mount to the conduit by threading the pendant cover
to the conduit as shown in Image 7.1.
2. Pull the PoE Ethernet cable through the cable pass-through in the
camera base plate and connect it to the camera’s Ethernet port.
3. Attach the camera base plate to the Pendant mount using the supplied
quantity. (2) machine screws.
Notes: The Alliance-mini Pendant Mount does not provide a weather seal to the camera. The Alliance-
mini in all of its mounting configurations is still an indoor camera.
When using the pendant mount, there is no place for the IQA-CAB connectors.
7
Figure 7.1